Fire Sprinkler/Standpipe Permits

What is it?

You need a Fire Sprinkler/Standpipe Permit when you are installing a new or making modification to an existing fire sprinkler system or standpipe system.

How Much Does it Cost?

Fees are based on the number heads, water supplies, fire pumps or standpipe systems added/relocated as outlined in Table D of the Redmond Fire Department Fees.  Half the permit fees are due at time of permit application. The balance is due upon permit issuance.

How Long Does It Take?

You can apply at the Development Services Center.  Intake appointments are required when you are submitting any permit that requires plan review or issuance of three (3) or more permits over-the-counter.  Please visit our online booking to schedule your appointment.  Your application and plans will be reviewed for completeness by our Fire Prevention counter staff to determine if your project qualifies for an expedited review.  If so, your project will be reviewed and the permit issued within 3-5 business days.  Otherwise full plan review generally takes 2-4 weeks.

Steps to Get Your Permit

1. Complete the Fire Sprinkler/Standpipe Permit Application
The Standard Permit portion shall be used for new systems or for modification of more than 25 heads.  Electronic plans and documents shall be provided and named as specified in bold type below:
  • Completed Fire Sprinkler/Standpipe Permit Application
  • Plans stamped by designer identifying the appropriate level of competency  
  • Plans shall comply with NFPA 13 Chapter 22 requirements for working plans
  • Product cut sheets for all piping and equipment to be used
  • Hydraulic Calculations
The Quick Start Permit application shall be used for installation or modification of 25 heads or less on sprinkler systems.  Quick Start Permits can be obtained on line through our Simple Online Permit Application (SOPA) process.  Electronic plans and documents shall be provided and named as specified in bold type below:
  • Completed Fire Sprinkler/Standpipe Permit Application
  • No new or relocated mains or cross mains
  • A stamped DOR Letter from sprinkler designer that states that the work will not affect the hydraulic calculations
  • A copy of the Plans showing the proposed area of work shall be submitted at time of permit application

2. Submit Application

To submit your application, visit the Development Services Center. Be sure to bring payment information as specified on the permit application form.
 
3. Permit Issuance
Pick up or print permit. You will be contacted when your plans are approved. You can pick up your permit and approved plans at the Development Service Center with a blank USB drive or log into the E-Track Portal where you can print your permit and approved plans.
 
4. Pay fees   
You will need to pay all outstanding fees to pick up or print your permit.